R262-ZA1 Gigabyte

Gigabyte Serveur Gigabyte (rev.100)  R262-ZA1 AMD EPYC 7003 - 2U 14-Bay

  • Hardware-level root of trust support
  • Single AMD EPYC™ 7002 series processor family
  • 8-Channel RDIMM/LRDIMM DDR4, 16 x DIMMs
  • 2 x 1Gb/s LAN ports (Intel® I350-AM2)
  • 1 x Dedicated management port
  • 12 x 3.5" hot-swappable SSD bays in front side
  • 2 x 2.5" hot-swappable SSD bays in rear side
  • Ultra-Fast M.2 with PCIe Gen4 x4 interface
  • Up to 9 x PCIe expansion slots
  • 1 x OCP 3.0 Gen4 x16 mezzanine slot
  • 1 x OCP 2.0 Gen3 x8 mezzanine slot
  • Dual 1200W 80 PLUS Platinum redundant power supply
Dimensions (WxHxD, mm)
2U
438 x 87.5 x 730
Motherboard
MZA2-CE0
CPU
AMD EPYC™ 7002 series processor family
Single processor, 7nm technology
Up to 64-core, 128 threads per processor
cTDP up to 240W

Compatible with AMD EPYC™ 7001 series processor family
Socket
Socket SP3
Chipset
System on Chip
Memory
16 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 128GB supported
LRDIMM modules up to 128GB supported
Memory speed: Up to 3200*/ 2933 MHz

- Note:
* Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC
LAN
2 x 1GbE LAN ports (1 x Intel® I350-AM2)
1 x 10/100/1000 management LAN
Video
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp
Audio
N/A
Storage
Front side:
12 x 3.5" hot-swappable HDD/SSD bays
- * 12 x blue HDD/SSD trays compatible with SATA/SAS devices

Rear side:
2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays

SAS card is required to enable the drive bays

Default configuration supports:
4 x 3.5" SATA/SAS drives in front side
2 x 2.5" SATA/SAS drives in rear side

Recommended 12Gb/s SAS cards:
CRA4448
CRA3338

* NOTE: 8 x blue HDD/SSD trays are enabled by optional SAS Card
SAS
Depends on SAS add-on card
RAID
Depends on SAS add-on card
Peripheral Drives
N/A
Expansion Slots
Riser Card CRS2027:
- 1 x PCIe x8 slot (Gen4 x8), Low profile half-length
- 1 x PCIe x8 slot (Gen4 x8), Low profile half-length

Riser Card CRS2225:
- 1 x PCIe x16 slot (Gen4 x16 or x8), Full height half-length
- 1 x PCIe x8 slot (Gen4 x0 or x8), Full height half-length
- 1 x PCIe x16 slot (Gen4 x16), Full height half-length

Riser Card CRS2225:
- 1 x PCIe x16 slot (Gen4 x16 or x8), Full height half-length
- 1 x PCIe x8 slot (Gen4 x0 or x8), Full height half-length
- 1 x PCIe x16 slot (Gen3 x16 or x8, shared with OCP2.0 mezzanine slot), Full height half-length

Internal Riser Card CRS101H:
- 1 x PCIe x16 slot (Gen4 x16), Full height half-length

1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth

1 x OCP 2.0 mezzanine slot with PCIe Gen3 x0 or x8 bandwidth, shared with CRS2225

1 x M.2 slot:
- M-key
- PCIe Gen4 x4
- Supports NGFF-2280/22110 cards
Internal I/O
1 x M.2 slot
1 x USB 3.0 header
1 x COM header
1 x TPM header
1 x OCP 3.0 mezzanine slot
1 x OCP 2.0 mezzanine slot
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
Front I/O
2 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x NMI button
1 x Reset button
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED
Rear I/O
2 x USB 3.0
1 x VGA
2 x RJ45
1 x MLAN
1 x ID button with LED
Backplane I/O
Front side_CBP20C5: 12 x SATA/SAS ports
Rear side_CBP2022: 2 x SATA/SAS ports

Speed and bandwidth:
SAS 12Gb/s, SATA 6Gb/s
TPM
1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010
Power Supply
2 x 1200W redundant PSUs
80 PLUS Platinum

AC Input:
- 100-240V~/ 12-7A, 50-60Hz
DC Input:
- 240Vdc/ 6A

DC Output:
- Max 1000W/ 100-240V~
+12V/ 80.5A
+12Vsb/ 3A
- Max 1200W/ 200-240V~ or 240Vdc input
+12V/ 97A
+12Vsb/ 3A
R262-ZA1

Fiche technique

Référence produit
R262-ZA1
Format
2U
Processeur
AMD EPYC™ 7002 series
Mémoires
16 x DIMM slots