SYS-2029U-E1CR25M

Supermicro SuperServer SYS-2029U-E1CR25M

1. Dual Socket P (LGA 3647) support
    2nd Gen Intel® Xeon® Scalable
    processors (Cascade Lake/Skylake)

2. 24 DIMMs; up to 6TB 3DS ECC
    DDR4-2933MHz RDIMM/LRDIMM,
    Supports Intel® Optane™ DCPMM††

3. 1 PCI-E 3.0 x16 slot (FH, 10.5" L),
    5 PCI-E 3.0 x8 slots (FH, 10.5" L),
    1 PCI-E 3.0 x8 slot (LP),
    1 PCI-E 3.0 x8 slot (internal LP)

4. 2 25GbE SFP28 Ethernet ports

5. 24 Hot-swap 2.5" drive bays:
    24 SAS3 via opt. AOC
    (4 hybrid ports - opt. 4 NVMe),
    Optional 2 hot-swap 2.5" rear drive
    bays for SSDs;
    Optional M.2 NVMe and SATA3 ports

6. 4 Heavy duty 8cm PWM fans

7. 1000W Redundant Power Supplies
    Titanium Level (96%)

Product SKUs
SYS-2029U-E1CR25M
  • SuperServer 2029U-E1CR25M (Black)
 
Motherboard

Super X11DPU
 
Processor
CPU
  • Dual Socket P (LGA 3647)
  • 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors,
    Dual UPI up to 10.4GT/s
  • Support CPU TDP 70-205W
Cores
  • Up to 28 Cores
Note  BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
 
System Memory
Memory Capacity
  • 24 DIMM slots
  • Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
  • Supports Intel® Optane™ DCPMM††
Memory Type
  • 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
  • 2666 ECC DDR4 NVDIMM
Note  2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
†† Cascade Lake only. Contact your Supermicro sales rep for more info.
 
On-Board Devices
Chipset
  • Intel® C621 chipset
SAS
  • SAS3 (12Gbps) via expander + Broadcom 3108/3008 AOC
Network Connectivity
  • 2 25GbE SFP28 ports via AOC-2UR68-m2TS (Mellanox ConnectX-4 Lx EN)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
  • ASPEED AST2500 BMC
 
Input / Output
SAS
  • 24 SAS3 ports support via expander and storage Add-on Cards
LAN
  • 2 25GbE SFP28 ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 3 USB 3.0 ports
    (2 rear, 1 Type A)
Video
  • 1 VGA Connector
Serial Header
  • 1 Serial header
DOM
  • 2 SuperDOM (Disk on Module) ports
 
System BIOS
BIOS Type
  • AMI 32Mb SPI Flash ROM
 
Management
Software
Power Configurations
  • ACPI Power Management
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-219U2TS-R1K02P-T
 
Dimensions and Weight
Width
  • 17.2" (437mm)
Height
  • 3.5" (89mm)
Depth
  • 27.76" (705.3mm)
Weight
  • Net Weight: 36 lbs (16.4 kg)
  • Gross Weight: 72 lbs (32.7 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • HDD activity LED
  • Network activity LEDs
  • System information (overheat/UID) LED
 
Expansion Slots
PCI-Express
    • 1 PCI-E 3.0 x16 (FH, 10.5" L)
    • 5 PCI-E 3.0 x8 (FH, 10.5" L)
    • 1 PCI-E 3.0 x8 (LP)
    • 1 PCI-E 3.0 x8 (internal LP)


(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
 
Drive Bays / Storage
Hot-swap
    • 24 Hot-swap 2.5" drive bays:
      24 SAS3 via opt. AOC
      (4 hybrid ports - opt. 4 NVMe)


Note: Storage Add-on card is required
M.2
  • 1 M.2 PCI-E 3.0 x4 M-Key NVMe or 1 M.2 M-Key SATA3 (2240/2260/2280/22110) via optional riser card (see optional parts list)
  • 2 M.2 PCI-E 3.0 x4 M-Key NVMe (2260/2280/22110) via optional add-on card AOC-SLG3-2M2
 
System Cooling
Fans
  • 4 Heavy duty 8cm PWM fans
Shroud
  • 1 Air Shroud
 
Power Supply
1000W Redundant Power Supplies with PMBus
Total Output Power
  • 800W: 100 – 127Vac
  • 1000W: 200 – 240Vac
  • 1000W: 200 – 240Vdc (for CCC only)
Dimension
(W x H x L)
  • 73.5 x 40 x 203 mm
Input
  • 100-127Vac / 9.8 - 7A / 50-60Hz
  • 200-240Vac / 7 - 5A / 50-60Hz
  • 200-240Vdc / 7 - 5A (for CCC only)
+12V
  • Max: 66.7A / Min: 0A (100-127Vac)
  • Max: 83A / Min: 0A (200-240Vac)
  • Max: 83A / Min: 0A (200-240Vdc)
12Vsb
  • Max: 2.1A / Min: 0A
Output Type
  • 25 Pairs Gold Finger Connector
Certification Titanium Level96%  Titanium Level
  Test Report ]
 
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
SYS-2029U-E1CR25M