AS -4023S-TRT Supermicro

Key Features Cloud Computing
Data Center
General purpose, SMB, Web Hosting

1.Dual AMD EPYC™ 7001/7002* Series Processors (*AMD EPYC 7002 series drop-in support requires board revision 2.x)

2.2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs (7001 Processors)
4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs (Board revision 2.x required + 7002 Processors)

3.Expansion slots:
2 PCI-E x16 slots
3 PCI-E x8 slots
M.2 Interface: 1 SATA/PCI-E 3.0 x2
(Platform with EPYC 7002 processor only supports PCI-E type M.2 module)
M.2 Form Factor: 2280, 22110
M.2 Key: M-key

4.Integrated IPMI 2.0 + KVM with dedicated LAN
• Software Out of Band License
 key (SFT-OOB-LIC) included
 for OOB BIOS management

5.Dual 10G LAN ports

6.8 hot-swap 3.5" SATA3 drive bays;
3 peripheral 5.25" drive bays;
1 M.2 NVMe SSD supported

7.1280W Redundant Power Supplies
Platinum Level
(Full redundancy based on configuration and application load)

Product SKUs
AS -4023S-TRT
  • A+ Server 4023S-TRT
Motherboard
H11DSi-NT
Processor/Chipset
CPU
  • Dual AMD EPYC™ 7001/7002* series Processors
    (* Board revision 2.x required)
  • Socket SP3
  • Supports CPU TDP 225W / cTDP up to 240W*
Cores
  • Up to 32 Cores (Board revision 1.x + 7001 Processors)
  • Up to 64 Cores (Board revision 2.x + 7002 Processors)
Chipset
  • System on Chip (SoC)
System Memory
Memory Capacity
  • 16 DIMM slots
  • Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors)
  • Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors)
  • 8-channel memory bus
Memory Type
  • DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors)
  • DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
DIMM Sizes
  • 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB*
    (* Board revision 2.x required + 7002 Processors)
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
SATA
  • SATA3 (6 Gbps)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2500 BMC
Network Controllers
  • 2 Intel® X550 10GBase-T Ethernet Controllers
  • 1 Realtek RTL8211E PHY (dedicated IPMI)
VGA
  • ASPEED AST2500 BMC
Expansion Slots
PCI-Express
  • 2 PCI-E x16 slots
  • 3 PCI-E x8 slots
M.2
  • Interface: 1 SATA/PCI-E 3.0 x2
    (Platform with EPYC 7002 processor only supports PCI-E type M.2 module)
  • Form factor: 2280, 22110
  • Key: M-key
Input / Output
SATA
  • 10 SATA3 (6 Gbps) ports
LAN
  • Dual 10G LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports (rear)
  • 2 USB 2.0 ports (rear)
VGA
  • 1 VGA port
SAS
  • 8 SAS3 ports support via optional Add-on Card
NVMe
  • 2 NVMe support with optional cables
Others
  • 1 COM port (rear)
  • 2 SATA DOM power connector
  • TPM 1.2 header
System BIOS
BIOS Type
  • AMI 128Mb SPI Flash EEPROM
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 5.1
  • USB Keyboard Support
  • SMBIOS 3.1.1
Chassis
Form Factor
  • Tower / 4U Rackmountable
Model
  • CSE-745BTS-R1K28BP2
Dimensions and Weight
Height
  • 17.8" (452mm)
Width
  • 7" (178mm)
Depth
  • 25.5" (647mm)
Package
  • 24.6" (H) x 14" (W) x 31.3" (D)
Weight
  • Net Weight: 59 lbs (26.76 kg)
  • Gross Weight: 62 lbs (28.12 kg)
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /
    UID LED
Drive Bays
Hot-swap
  • 8 hot-swap 3.5" Drive Bays:
    • 8 SATA3 by default
    • or 8 SAS3
Peripheral Drives
5.25"
  • 3 peripheral 5.25" drive bays
Backplane
HDD Backplane
  • Supports 8 SATA3 or 8 SAS3 HDD
System Cooling
Fans
  • 3 internal hot-swap 9400 RPM fans
  • 2 external rear hot-swap 9400 RPM fans
Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
  • 1000W Output @ 100-140V, 8-12A, 50-60Hz
  • 1280W Output @ 180-240V, 6-8A, 50-60Hz
DC Output
  • 1000W: +12V/83A; +5Vsb/4A
  • 1280W: +12V/106.7A, +5Vsb/4A
Certification Platinum Level Certified95%+
Platinum Certified
Test Report ]
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT
  • CPU switching voltage regulator
FAN
  • Up to 8-fan status tachometer monitoring
  • Up to eight 4-pin fan headers
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
AS -4023S-TRT