Tyan Transport HX TN83B8251 (B8251T83E8HR-2T-N)

Transport HX TN83-B8251
2U 4-GPU HPC Server
- Dual-Socket AMD EPYC™ 7002 (Rome)
- 16 DIMM slots
- PCIe Gen 4.0 support
- Support up to 4DW / 8 SW GPU cards
- 8 3.5" SATA/NVMe U.2 tool-less drive bays
- Hot-swap redundant PSU
Tyan Transport HX TN83B8251 (B8251T83E8HR-2T-N) Specifications | |||
---|---|---|---|
System | Form Factor | 2U Rackmount | |
Chassis Model | TN83 | ||
Dimension (D x W x H) | 32.71" x 17.25" x 3.43" (831 x 438.4 x 87mm) | ||
Motherboard Name | S8251GM2NE-2T# | ||
Motherboard Notification | # The motherboard not sold separately | ||
Gross Weight | 33.1 kg (73 lbs) | ||
Net weight | 20.3 kg (44.8 lbs) | ||
Front Panel | Buttons | (1) RST / (1) PWR w/ LED / (1) UID | |
LEDs | (1) HDD / (2) LAN / (1) UID / (1) System Event | ||
I/O Ports | (2) USB 3.1 Gen1 ports | ||
External Drive Bay | Q'ty / Type | (8) 3.5/2.5" Hot-swap SSD/HDDs | |
HDD Backplane Support | SAS 12Gb/s /SATA 6Gb/s /NVMe | ||
Supported HDD Interface | (8) SATA 6Gb/s / NVMe | ||
Notification | The SAS/SATA HDD backplane is connected to onboard SATA connection by default. Please contact Tyan technical support if a discrete SAS HBA/RAID adapter is required. | ||
System Cooling Configuration | FAN | (5) 8cm fans | |
Power Supply | Type | CRPS | |
Input Range | AC 200-240V/12.6A | ||
Frequency | 47-63 Hz | ||
Output Watts | 2,200 Watts | ||
Efficiency | PFC / 80 plus Platinum | ||
Redundancy | 1+1 | ||
Processor | Q'ty / Socket Type | (2) AMD Socket SP3 | |
Supported CPU Series | (2) AMD EPYC™ 7002 Series Processors | ||
Configurable Thermal Design Power (cTDP) Wattage | Max up to 200W | ||
Memory | Supported DIMM Qty | (8)+(8) DIMM slots | |
DIMM Type / Speed | DDR4 ECC RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS 3200 | ||
Capacity | Up to 2,048GB RDIMM / 4,096GB LRDIMM 3DS | ||
Memory channel | 8 Channels per CPU | ||
Memory voltage | 1.2V | ||
Expansion Slots | Pre-install TYAN Riser Card (PCI-E Gen4) |
(1) M8251T83-L32-4F riser card for (2) FH/FL PCI-E Gen4 x16 + (2) FH/FL PCI-E Gen4 x8 slots (left) * split by Mux. / (1) M8251T83-R32-4F riser card for (2) FH/FL PCI-E Gen4 x16 + (2) FH/FL PCI-E Gen4 x8 slots (right) * split by Mux. / (1) M8251T83-LR32-2L riser card for (1) HH/HL PCI-E Gen4 x16 (right) +(1) HH/HL PCI-E Gen4 x16 (left) slots | |
Physical Dimensions | FH/FL (Full-height / Full-length): 4.4" x 12.3" (111.2 x 312mm) HH/ HL (Half-height / Half-length): 2.7" x 6.6" (68.9 x 167.7mm) FH/10.5”L (Full-height / 10.5” in length ): 4.4" x 10.5" (111.2 x 266.7mm) |
||
LAN | Q'ty / Port | (2) 10GbE ports, (1) GbE port dedicated for IPMI | |
Controller | Intel X550-AT2 | ||
PHY | Realtek RTL8211E | ||
Storage | SATA | Connector | (2) SATA-DOM / (8) SATA from (2) Slim SAS (8-ports) |
Controller | Direct from AMD EPYC CPU | ||
Speed | 6Gb/s | ||
RAID | N/A | ||
NVMe | Connector (Slim SAS) | (4) SFF-8654 for (8) NVMe ports | |
Graphic | Connector type | D-Sub 15-pin | |
Resolution | Up to 1920x1200 | ||
Chipset | Aspeed AST2500 | ||
I/O Ports | USB | (2) USB3.1 Gen1 ports (@ rear) / (2) USB3.1 Gen1 ports (via Cable) / (1) USB3.1 Gen1 port (Type-A) | |
COM | (1) DB-9 port (COM1) + (1) header (COM2) | ||
VGA | (1) D-Sub 15-pin port | ||
RJ-45 | (2) 10GbE ports, (1) dedicated GbE for IPMI | ||
SATA | (8) SATA from (2) Slim SAS connectors + (2) SATA-DOM connectors | ||
TPM (Optional) | TPM Support | Please refer to our TPM supported list. | |
System Monitoring | Chipset | Aspeed AST2500 | |
Temperature | Monitors temperature for CPU & memory & system environment | ||
Voltage | Monitors voltage for CPU, memory, chipset & power supply | ||
LED | Over temperature warning indicator / Fan & PSU fail LED indicator | ||
Others | Watchdog timer support | ||
Server Management | Onboard Chipset | Onboard Aspeed AST2500 | |
AST2500 iKVM Feature | 24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub | ||
AST2500 IPMI Feature | IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface | ||
BIOS | Brand / ROM size | AMI / 32MB | |
Feature | Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / Console Redirection / ACPI 6.1 / ACPI sleeping states S0, S5 / FAN speed control automatic | ||
Operating System | OS supported list | Please refer to our AVL support lists. | |
Regulation | FCC (SDoC) | Class A | |
CE (DoC) | Class A | ||
CB/LVD | Yes | ||
RCM | Class A | ||
VCCI | Class A | ||
Operating Environment | Operating Temp. | 10° C ~ 35° C (50° F~ 95° F) | |
Non-operating Temp. | - 40° C ~ 70° C (-40° F ~ 158° F) | ||
In/Non-operating Humidity | 90%, non-condensing at 35° C | ||
RoHS | RoHS 6/6 Compliant | Yes | |
Package Contains | Barebone | (1) TN83-B8251 Barebone | |
Manual | (1) Quick Installation Guide |